Red Seal Occupational Standard - Roofer

Table of Contents

RSOS Products for Download

The Roofer Red Seal Occupational Standard is developed by Canadian trade representatives. It collects information about the trade as it is practiced across Canada.

This RSOS information is combined in several ways to generate several RSOS Products, each these is based on information contained in the complete RSOS, and is geared to user needs:

Product Purpose
Red Seal Occupational Standard - Roofer (PDF, 3.1 MB) A complete description of all trade activities, skills and knowledge. The Standard defines the trade by collecting and organizing elements together.
Trade Profile - Roofer (PDF, 594 KB) A quick snapshot of all trade activities in the standard. It can be used to self-assess experience. It can be used to introduce a concise summary of all trade activities to those wanting to learn about the trade. It can also be used for gap analysis.
Red Seal Exam Self-Assessment Guide – Roofer (PDF, 748 KB) Use this self-assessment tool to rate your own understanding and experience with the tasks of the trade that are on the Red Seal examination.

Overview

Foreword

The Canadian Council of Directors of Apprenticeship (CCDA) recognizes this Red Seal Occupational Standard (RSOS) as the Red Seal standard for the Roofer trade.

Background

The first National Conference on Apprenticeship in Trades and Industries, held in Ottawa in 1952, recommended that the federal government be requested to cooperate with provincial and territorial apprenticeship committees and officials in preparing analyses of a number of skilled occupations. Employment and Social Development Canada (ESDC) sponsors the Red Seal Program, which, under the guidance of the CCDA, develops a national occupational standard for each of the Red Seal trades.

Standards have the following objectives:

Any questions, comments, or suggestions for changes, corrections, or revisions to this standard or any of its related products may be forwarded to:

Trades and Apprenticeship Division
Apprenticeship and Sectoral Initiatives Directorate
Employment and Social Development Canada
140 Promenade du Portage, Phase IV, 6th Floor
Gatineau, Quebec K1A 0J9

Acknowledgements

The CCDA and ESDC wish to express sincere appreciation for the contribution of the many tradespersons, industrial establishments, professional associations, labour organizations, provincial and territorial government departments and agencies, and all others who contributed to this publication.

Special thanks are offered to the following representatives who contributed greatly to the original draft of the standard and provided expert advice throughout its development:

This standard was prepared by the Apprenticeship and Sectoral Initiatives Directorate of ESDC. The coordinating, facilitating and processing of this standard were undertaken by employees of the standards development team of the Trades and Apprenticeship Division and of Saskatchewan, the host jurisdiction for this trade.

Structure of the Occupational Standard

This standard contains the following sections:

Methodology

Development of the Standard

A draft standard is developed by a broad group of trade representatives, including tradespeople, instructors and employers at a National Workshop led by a team of facilitators. This draft standard breaks down all the tasks performed in the occupation and describes the knowledge and abilities required for a tradesperson to demonstrate competence in the trade.

Harmonization of Apprenticeship Training

An analysis of all provinces’ and territories’ apprenticeship programs is performed and recommendations are made on harmonizing the name of the trade, the hours of training required and the number of levels of training. Provinces and territories consult with their respective industry stakeholders on these elements and revisions are discussed until consensus is reached. Following the development of the workshop draft of the RSOS, participants discuss and come to consensus on the sequence of training topics, as expressed in the new standard. Their sequencing recommendations are reviewed by stakeholders in participating provinces and territories and further discussions are convened to reach consensus and to identify any exceptions.

Online Survey

Stakeholders are asked to review and validate the activities described in the new standard via an online survey. These stakeholders are invited to participate in this consultation through apprenticeship authorities, as well as national stakeholder groups.

Draft Review

The RSOS development team forwards a copy of the standard and its translation to provincial and territorial authorities who consult with industry representatives to review it. Their recommendations are assessed and incorporated into the standard.

Validation and Weighting

Participating provinces and territories also consult with industry to validate and weight the document for the purpose of planning the makeup of the Red Seal Interprovincial Examination for the trade. They validate and weight the major work activities (MWA), tasks and sub-tasks, of the standard as follows:

The results of this exercise are submitted to the RSOS development team who then analyzes the data and incorporates it into the document. The RSOS provides the individual jurisdictional validation results as well as the national averages of all responses. The national averages for MWA and task weighting guide the Interprovincial Red Seal Examination plan for the trade.

The validation of the RSOS is used to identify common core sub-tasks across Canada for the occupation. If at least 70% of the responding jurisdictions’ industry performs a sub-task, it shall be considered common core. Interprovincial Red Seal Examination questions are limited to the common core sub-tasks identified through this validation process.

Definitions for Validation and Weighting

Yes
sub-task performed by qualified workers in the occupation in that province or territory
No
sub-task not performed by qualified workers in the occupation in that province or territory
NV
standard Not Validated by that province or territory
ND
trade Not Designated in a province or territory
Not Common Core (NCC)
sub-task, task or MWA performed less than 70% of responding jurisdictions; these will not be tested by the Interprovincial Red Seal Examination for the trade
National Average %
average percentage of questions assigned to each MWA and task in Interprovincial Red Seal Examination for the trade

Provincial/Territorial Abbreviations

NL
Newfoundland and Labrador
NS
Nova Scotia
PE
Prince Edward Island
NB
New Brunswick
QC
Quebec
ON
Ontario
MB
Manitoba
SK
Saskatchewan
AB
Alberta
BC
British Columbia
NT
Northwest Territories
YT
Yukon Territory
NU
Nunavut

Description of the Roofer trade

“Roofer” is this trade’s official Red Seal occupational title approved by the CCDA. This standard covers tasks performed by roofers whose occupational title has been identified by some provinces and territories of Canada under the following names:

English Provincial and Territorial Trade Names
  NL NS PE NB QC ON MB SK AB BC YT NT NU
Roofer Check MarkNL Check MarkNS Check MarkPE Check MarkNB Check MarkQC Check MarkON Check MarkMB Check MarkSK Check MarkAB - Check MarkYT Check MarkNT Check MarkNU
Roofer (Roofer, Damp and Waterproofer) - - - - - - - - - Check MarkBC - - -

Roofers install, repair, maintain and replace roofing systems. They work with membrane roofing systems that consist of a variety of materials with different application methods. They also install, replace, maintain and repair shingles, slates, shakes, roofing tiles, sheet metal and other pre-formed sheeting on sloped roofs.

Before the work begins, roofers may inspect existing roof systems and determine the extent and procedure for repair of the roofing assembly components or removal, re-covering and replacement of roofing materials. Some roofers may be involved in the estimating of material and installation costs.

As part of the job preparation, roofers may set up scaffolding to provide safe access to the work area and may install fall protection systems. They also weatherproof, waterproof and damp-proof roofing surfaces, foundation walls, floor slabs and bridge decks. They may install roofing accessories such as sheet metal flashings, roof vent flashings, anchor tie-off flashings, drain inserts and clamps.

Roofers may be employed by roofing companies, general contractors or they may be self-employed. They may work on all types of roofs or may specialize in the low sloped roofs of commercial and industrial buildings or on the steep sloped roofs found in most residential buildings.

Key attributes for people in this trade are mechanical aptitude, manual dexterity and the ability to work in a team. Roofers work primarily outdoors and work may be seasonal. The work environment is exposed and may vary from extreme cold to extreme heat. Roofing is physically demanding work and requires considerable effort in lifting, climbing, bending, kneeling and balancing on high, sloped and sometimes slippery surfaces.

Roofers work in conjunction with other tradespeople in the construction trades such as sheet metal workers, mechanical contractors, electricians and carpenters in industrial, commercial, institutional and residential sectors. With additional training, roofers may transfer their skills to related occupations such as carpenter, sheet metal worker, bricklayer and glazier. With experience, they may advance to positions such as supervisors, estimators, project managers, contractors, consultants, technical representatives or inspectors.

Trends in the Roofer trade

New products

There is an increase in the types of roofing system designs available to meet the ever-changing Canadian environment. Eco-friendlier roof designs such as green roofs and reflective roof materials are more common. In addition, more environmentally friendly products are being used, such as single-ply membranes, cold-applied and mechanically fastened systems, rather than hot-applied bitumen.

Due to the environmental impacts and health risks of hot asphalt products, new innovations such as low-rise adhesives are replacing these products in many roof system designs. These adhesives may have their own risks and must be used according to manufacturers’ specifications.

On low slope roofing, chemical adhesives are reducing the need for asphalt and mechanical fasteners. In many roof applications, there are more self-adhesive materials that are used. The use of adhesives reduces thermal bridging that is inherent with mechanical fasteners.

There are new adhesives on the market that are low-volatile organic compounds (LVOC) that are replacing solvent-based adhesives which are used for the securement of roofing components. These new adhesives reduce volatile off-gassing in confined spaces.

Cold applied systems reduce the risk of fire during installation. Insurance companies and manufacturers are supporting this method as a safer way to install the roofing system.

There is an increase in synthetic underlayments on the market. These are applied under a steep slope roof and are lighter and last longer than traditional barriers.

Terminology in the industry is evolving as well. For example, the acronyms MARS, AARS and PARS are entering the roofing vocabulary. MARS stands for mechanically attached roofing system. AARS stands for adhesive adhered roofing system. PARS stands for partially adhered roofing system.

Tools and equipment

The trade has become more mechanized with many pieces of equipment such as automatic membrane installation equipment and heat induction equipment. These have increased productivity and efficiency and may reduce labour requirements. They may also help reduce the risk of personal injury and property damage. Roofers need to be trained in the proper use and maintenance of this new equipment.

Health and safety

There is more emphasis on safety training and orientation in the workplace. In some jurisdictions, it is mandatory for employees to take fall protection / working at heights, and site and task specific safety policy and procedures training.

Mobile fall protection systems are now being used to reduce risk and injury on buildings that do not have permanent anchoring systems in place.

Environmental

Recycling roofing materials and refacing are becoming more popular due to environmental concerns and LEED requirements on construction projects. These new practices may reduce disposal costs.

Essential skills summary

Essential skills are needed for work, learning and life. They provide the foundation for learning all other skills and enable people to evolve with their jobs and adapt to workplace change.

Through extensive research, the Government of Canada and other national and international agencies have identified and validated nine essential skills. These skills are used in nearly every occupation and throughout daily life in different ways.

A series of CCDA-endorsed tools have been developed to support apprentices in their training and to be better prepared for a career in the trades. The tools can be used independently or with the assistance of a tradesperson, trainer, employer, teacher or mentor to:

The tools are available online or for order at:

The application of these skills may be described throughout this document within the skills and knowledge which support each sub-task of the trade. The following are summaries of the requirements in each of the essential skills, taken from the essential skills profile. A link to the complete essential skills profile can be found at http://www.red-seal.ca/.

Industry expected performance

All tasks must be performed according to the applicable jurisdictional regulations, codes and standards. All health and safety standards must be respected and observed. Work should be done efficiently and to a high quality without material waste or environmental damage. All requirements of employers, engineers, designers, manufacturers, clients and quality control policies must be met. At a journeyperson level of performance, all tasks must be done with minimal direction and supervision. As a journeyperson progresses in their career there is an expectation they continue to upgrade their skills and knowledge to maintain pace with industry and promote continuous learning in their trade through mentoring of apprentices.

Language requirements

It is expected that journeypersons are able to understand and communicate in either English or French, which are Canada’s official languages. English or French are the common languages of business as well as languages of instruction in apprenticeship programs.

Pie chart of Red Seal examination weightings

Text version
  • MWA A Performs common occupational skills 18%
  • MWA B Prepares roof and deck 14%
  • MWA C Installs low slope roofing 31%
  • MWA D Installs steep slope roofing 13%
  • MWA E Waterproofs and damp-proofs surfaces 10%
  • MWA F Assesses, maintains and repairs roof 14%

This pie chart represents a breakdown of the interprovincial Red Seal examination. Percentages are based on the collective input from workers from the trade from across Canada. The Task Matrix on the next pages indicates the breakdown of tasks and sub-tasks within each Major Work Activity and the breakdown of questions assigned to the Tasks. The Interprovincial examination for this trade has 125 questions.

Roofer - Task matrix

MWA A – Performs common occupational skills - 18%

MWA B – Prepares roof and deck - 14%

MWA C – Installs low slope roofing - 31%

MWA D – Installs steep slope roofing - 13%

MWA E – Waterproofs and damp-proofs surfaces - 10%

MWA F – Assesses, maintains and repairs roof - 14%

Harmonization of apprenticeship training

Provincial and territorial apprenticeship authorities are each responsible for their respective apprenticeship programs. In the spirit of continual improvement, and to facilitate mobility among apprentices in Canada, participating authorities have agreed to work towards harmonizing certain aspects of their programs where possible. After consulting with their stakeholders in the trade, they have reached consensus on the following elements. Note that implementation of these elements may vary from jurisdiction to jurisdiction, depending on their own circumstances. For more information on the implementation in any province and territory, please contact that jurisdiction’s apprenticeship authority.

1. Trade name

The official Red Seal name for this trade is Roofer.

2. Number of Levels of Apprenticeship

The number of levels of technical training recommended for this trade is three (3).

3. Total Training Hours During Apprenticeship Training

The total hours of training, including both on-the-job and in-school training for this trade is 5400.

4. Sequencing Topics and Related Subtasks

The topic titles in the table below are placed in a column for each apprenticeship level for technical training. Each topic is accompanied by the subtasks and their reference number. The topics in the grey shaded cells represent those that are covered “in context” with other training in the subsequent years.

Apprenticeship level for technical training
Level 1 Level 2 Level 3
- Context Context
- Performs safety-related functions Performs safety-related functions
- Common steep slope practices Common steep slope practices
Performs safety-related functions
1.01 Maintains safe work environment
1.02 Uses personal protective equipment (PPE) and safety equipment
- -
Uses tools and equipment
(Overview)
2.01 Uses hand tools
2.02 Uses power tools, pneumatic tools, and hot-air welding, induction and fuelled equipment
2.03 Uses hoisting, lifting and rigging equipment
2.04 Uses access equipment
2.05 Uses hot process equipment
2.06 Uses motorized equipment
Uses tools and equipment
(Task Specific)
2.01 Uses hand tools
2.02 Uses power tools, pneumatic tools, and hot-air welding, induction and fuelled equipment
2.03 Uses hoisting, lifting and rigging equipment
2.04 Uses access equipment
2.05 Uses hot process equipment
2.06 Uses motorized equipment
Uses tools and equipment
(Task Specific)2.01 Uses hand tools
2.02 Uses power tools, pneumatic tools, and hot-air welding, induction and fuelled equipment
2.03 Uses hoisting, lifting and rigging equipment
2.04 Uses access equipment
2.05 Uses hot process equipment
2.06 Uses motorized equipment
Organizes Work
3.01 Uses documentation and reference materials
3.02 Interprets blueprints and drawings
3.04 Assesses worksite conditions
3.05 Positions equipment and material on the ground and on the roof
3.06 Prepares material disposal systems
Organizes Work
3.01 Uses documentation and reference materials
3.02 Interprets blueprints and drawings
3.04 Assesses worksite conditions
3.05 Positions equipment and material on the ground and on the roof
3.06 Prepares material disposal systems
Organizes Work
3.02 Interprets blueprints and drawings
3.03 Estimates material
3.07  Evaluates roof conditions near roof-top equipment installations
Uses communication techniques
4.01 Uses communication techniques
- Uses communication and mentoring techniques
4.01 Uses communication techniques
4.02 Uses mentoring techniques
Prepares roof for replacement
5.01 Protects surrounding area
5.02 Removes loose debris
5.03 Removes roofing and flashings
Prepares roof for replacement
5.04 Prepares roof substrate
5.05 Performs minor adjustments to penetrations, curbs and parapets
-
Prepares deck for roof installation
6.02 Cleans surface of deck
6.04 Dries deck
Prepares deck for roof installation
6.01 Inspects deck
6.03 Verifies placement of roof penetrations, curbs and parapets
Prepares deck for roof installation
6.01 Inspects deck
6.03 Verifies placement of roof penetrations, curbs and parapets
Applies low slope roofing components
(Overview/Identification of Components)
7.01 Installs support panels
7.02 Primes substrate
7.03 Applies vapour retarder, vapour barrier and air barrier
7.04 Installs insulation
7.05 Installs cover board
7.06 Installs drains, vents, curbs and penetrations
7.07 Applies ballast, walkways and protective surfaces
7.08 Installs metal flashings
Applies low slope roofing components
7.01 Installs support panels
7.02 Primes substrate
7.03 Applies vapour retarder, vapour barrier and air barrier
7.04 Installs insulation
7.05 Installs cover board
7.06 Installs drains, vents, curbs and penetrations
7.07 Applies ballast, walkways and protective surfaces
7.08 Installs metal flashings
Applies low slope roofing components
(Trade Science/Installation of Components)
7.01 Installs support panels
7.02 Primes substrate
7.03 Applies vapour retarder, vapour barrier and air barrier
7.04 Installs insulation
7.05 Installs cover board
7.06 Installs drains, vents, curbs and penetrations
7.07 Applies ballast, walkways and protective surfaces
7.08 Installs metal flashings
Applies low slope roofing membranes
(BUR)
8.01 Relaxes membranes
8.02 Sets membranes
8.03 Applies membranes using hot-liquid process
8.06 Applies membranes using cold-applied methods
8.07 Applies membranes using mechanical fasteners
8.10 Installs membrane flashings
8.11 Installs temporary seals and temporary drains
Applies low slope roofing membranes
(Modified Bitumen)
8.01 Relaxes membranes
8.02 Sets membranes
8.03 Applies membranes using hot-liquid process
8.04 Applies membranes using torched-on method
8.05 Applies membranes using hot-air welding
8.06 Applies membranes using cold-applied methods
8.07 Applies membranes using mechanical fasteners
8.10 Installs membrane flashings
8.11 Installs temporary seals and temporary drains
Applies low slope roofing membranes
(Thermoplastics, Thermosets, Liquid-applied,
Trade Science)
8.01 Relaxes membranes
8.02 Sets membranes
8.03 Applies membranes using hot-liquid process
8.05 Applies membranes using hot-air welding
8.06 Applies membranes using cold-applied methods
8.07 Applies membranes using mechanical fasteners
8.08 Applies loose-laid membranes
8.09 Applies liquid-applied membranes
8.10 Installs membrane flashings
8.11 Installs temporary seals and temporary drains
Common steep slope practices
9.01 Installs steep slope underlayment
9.02 Installs steep slope venting
9.03 Installs steep slope valley applications
9.04 Installs steep slope saddles/crickets
9.05 Installs steep slope penetration flashings
- -
Applies shingles
(Asphalt)
10.01 Determines layout of shingles
10.02 Installs starter strip and starter course
10.03 Fastens shingles
10.04 Cuts shingles
10.05 Tabs shingles
10.06 Installs metal flashings for shingled roofs
Applies shingles
(Wood and Composite)
10.01 Determines layout of shingles
10.02 Installs starter strip and starter course
10.03 Fastens shingles
10.04 Cuts shingles
10.06 Installs metal flashings for shingled roofs
Applies shingles
(Metal)
10.01 Determines layout of shingles
10.02 Installs starter strip and starter course
10.03 Fastens shingles
10.04 Cuts shingles
10.06 Installs metal flashings for shingled roofs
- - Applies roof tiles
11.01 Installs battens/strapping for roof tiles
11.02 Fastens roof tiles
11.03 Cuts roof tiles
11.04 Installs closure strips for roof tiles
11.05 Installs ridge and hip caps
11.06 Installs metal flashings for tiled roofs
- - Applies pre-formed metal roofing
12.01 Installs battens/strapping for pre-formed metal roofing
12.02 Fastens pre-formed metal roofing
12.03 Cuts sheet metal
12.04 Installs closure strips for pre-formed metal roofing
12.05 Installs snow guards
12.06 Installs metal flashings for pre-formed metal roofs
- Waterproofs surfaces
13.01 Prepares waterproofing substrates
13.02 Applies waterproofing membrane
Waterproofs surfaces
13.03 Installs green, sustainable, vegetative and protected membrane components
- Damp-proofs surfaces
14.01 Applies damp-proofing materials
14.02 Applies protection layer
 
- - Assesses roof condition
15.01 Performs roof inspections
15.02 Performs cut test
15.03 Determines maintenance or repair required
- Maintains and repairs low slope roofing
16.01 Maintains low slope roofing
16.02 Repairs low slope roofing
Maintains and repairs low slope roofing
16.01 Maintains low slope roofing
16.02 Repairs low slope roofing
- Maintains and repairs steep slope roofing
17.01 Maintains steep slope roofing
17.02 Repairs steep slope roofing
Maintains and repairs steep slope roofing
17.01 Maintains steep slope roofing
17.02 Repairs steep slope roofing